16
surface using the included suction cup mount.
Attaching the MSR-200 to the suction cup mount
1. Thread suction mount in to threaded insert on
MSR-200.
2. Orient MSR-200 in desired position on mount and
tighten hand wheel until snug.
Note: If needed, the mounting arm can be remove and
attached in the opposite direction to provide additional
mounting position options.
Mounting the unit with lever in up position, press
suction cup firmly against mounting surface and rotate
lever downward.
4. Menus and Setup
Press MENU button to access setup menus in Camcorder
or Camera mode. To exit menus press MENU button.
17
Camcorder/ Camera Mode
White Balance
1. Press MENU button in Camcorder mode or Camera
mode.
2. Press OK button to select White Balance mode.
3. Press to select Auto/ Sunny/ Cloudy/ Tungsten/
Fluorescent according to various lighting conditions.
Press OK button again for confirmation.
Note: You can also adjust the white balance while in
camcorder or camera mode simply by pressing.
Resolution
1. Press MENU button in Camcorder mode.
2. Press
to select Resolution mode and press OK
button.