12
the SD card indicator in the lower right corner when an SD
card is in the slot.
When the optional SD card is installed:
1. All videos and images by default will be automatically
stored in SD card.
2. With SD card installed, the video clips/ images stored in
the built-in memory cannot be viewed. To playback the
video clips/ images/ audio clips stored in the built-in
memory, remove SD card.
3. When you format Video Camera it will format the video
clips/ images on SD card only. To format the video clips/
images stored in the built-in memory, remove the SD
card.
Recording Video Clips
There are 2 ways to record video clips with the MSR-200.
13
(a)Press the CAMCORDER button to start recording.
Press the CAMCORDER button again to stop
recording.
(b)Plug the remote record button into the remote port as
shown. Press the remote record button to start recording.
Press the remote record button again to stop recording.
Note: Be sure that power is off when plugging in the
remote cable. Plugging in the cable with the power on can
cause the unit to lock up. If this happens, immediately
remove and reinstall the battery.
Capturing Still Images
1. Press the CAMERA button to enter Still Mode.
2. Press the CAMERA button to take a picture.