© 2019 Hoymiles Converter Technology Co., Ltd. All rights reserved.
10
HM-500T/HM-600T/HM-700T/HM-800T
rain exposure, snow layup, UV etc. Allow a minimum of 2 cm of space around the microinverter
enclosure.
*Note: For some countries the DTU will be required to meet the local grid regulation (e.g. G98/99 for UK etc.)
5.3 Space Distance Required
Please install the Microinverter at least 50cm above the ground/roof for better communication with
Hoymiles DTU. Please contact with Hoymiles technical engineer if there is any special circumstance.
5.4 Preparation
Installation of the equipment is carried out based on the system design and the place in which the
equipment is installed.
The installation must be carried out with the equipment disconnected from the grid (power
disconnect switch open) and with the photovoltaic modules shaded or isolated.
Referring to the Technical Data to make sure the environmental conditions fit the
microinverter’s requirement (degree of protection, temperature, humidity, altitude, etc.)
Summary of Contents for HM-500T
Page 1: ...Version 1 0 April 2020...
