background image

User Manual

 

Q

2

RollerManual Rev. G

 

www.HoverMatt.com  |  

3

Air Supply Keypad Functions

Transfer 

Speed 

High

Adjustable/ 

Pressure 

Setting

Transfer 

Speed 

Low

   Standby (Amber LED)

Power Indication

Adjustable Speed

Indication 

(Green Flashing LED) 

Green LEDs

The ADJUSTABLE keypad function has four different settings. 

Each press of the button increases the air pressure and rate 

of inflation. The Green Flashing LED will indicate the inflation 

speed by the number of flashes (i.e. two flashes equals the 

second inflation speed).

STANDBY: Used to stop inflation/air flow (Amber LED indicates 

STANDBY mode).

Instructions for Use

1.  Ensure the red deflation valves are capped tightly before beginning 

inflation.

2.  Place the Q

2

Roller on the bed mattress, and center using the Center 

Line Indictor.

3.  Tuck the securing apron of the Q

2

Roller under the bed mattress to 

keep it in place during use.

4.  Remove the backing from the adhesive strips on the Q

2

R Pad, and 

center it on top of the Q

2

Roller (if the patient is already on the  

mattress, place the device and pad under the patient using a  

log-rolling technique).

5.  With the patient centered on the device, ensure all bed/stretcher  

rails are up, or follow your facility’s protocol. 

6.  Locate the inflation valve on the OPPOSITE side of the turn direction, 

and place the air supply hose over the valve. Press the ADJUSTABLE 

button on the HT-Air keypad to initiate air flow. If necessary, press this 

button up to 3 more times to increase air flow and rate of inflation.

7.  When the turn is complete, remove the hose from the valve and press 

the STANDBY button on the air supply keypad to stop air flow. Cham-

ber may not need to be fully inflated to achieve desired position.

8.  To quickly deflate the Q

2

Roller, remove the red cap from the deflation 

valve. To slowly deflate or adjust the chamber, depress the center of 

the black inflation valve.

Product Specifications/Required Accessories

Q2ROLLER

®

 LATERAL TURNING DEVICE

Material:

Polyurethane

Construction:

RF Welded

Width:

Chambers: 46.5" (118 cm) 

(combined chamber width)

Apron: 72" (183cm)

Length:

Chambers: 44.5" (113 cm)

Apron: 44" (112 cm)

LATEX FREE

Model #: HTR-200

Patient Weight Limit: 600 lbs. (272 kg)

Single-Patient Use

Q2R

®

 PAD

Material:

Non-Woven, Breathable PE

Construction:

Thermal Bonding

Width:

39” (99 cm)

Length:

39” (99 cm)

Model #: HTR-CHX-5PACK (5 ea.) 

Model #: HTR-CHX-CASE (50 ea.)

REQUIRED ACCESSORY:

Model #: HTAIR1200 (North American Version) – 120V~, 60 Hz, 10A 

Model #: HTAIR2300 (European Version) – 230V~, 50 Hz, 6A

Model #: HTAIR1000 (Japanese Version) – 100V~, 50/60 Hz, 12.5A 

Model #: HTAIR2356 (Korean Version) – 230V~, 50/60 Hz, 6A

Reviews: