l
You should follow the manufacturer's instructions and use the manufacturer’s recommended
installation accessories when you install the CenterStage.
l
Please use this product’s standard power cable.
l
To avoid electric shock, the back cover should not be opened by a non-professional
maintenance staff member.
l
Before operation, please ensure compatibility between the local voltage value and the
CenterStage’s rated voltage value. If the monitor will not be used for an extended period of
time, the user should remove the plug from the power socket.
l
Please use three-prong power supply sockets and make sure the ground wire is well
connected.
l
Do not install or put the machine in places with high heat sources such as hot stoves, heat-
transfer tubes, power amplifiers, sources of direct light, dust, high humidity and places with
mechanical vibration. In order to achieve optimal performance, please keep the monitor
away from high voltage distribution networks, large metal objects, radar stations etc.
l
If an abnormal sound or smell arises, turn off the power supply and unplug the device
immediately. Stop using it and ask professional staff to resolve the problems until the
problems are fixed.
l
Avoid exposure to liquids and metals. If any liquid or metal falls into the machine, please
shutdown the monitor and cut off the power supply immediately. Contact professional
maintenance personnel to repair.
l
Do not use chemical reagent to wipe the machine; solvent may cause deterioration or
damage to the paint surface. To clean, disconnect the power supply and wipe it with a cloth if
there is dust or dirt.
l
Do not power off/power on the CenterStage frequently in a short amount of time as it may
affect the lifetime of the screen. After normal shutdown, please wait about three minutes or
longer to reboot your CenterStage.
l
In order to extend the service life of the screen, please do not set display brightness and
contrast to the maximum value for extended periods of time.
l
To avoid product damage, do not place the CenterStage on an unstable stand, bracket, or
table.
l
Take caution when moving the CenterStage to avoid being hit, squeezed etc. Special attention
should be taken in regards to the touch screen area to avoid causing damage.
l
The wall mounting installation is best compatible in normal cement walls, solid walls and
wood walls that can support three times the weight or more of the CenterStage. Please
ensure good ventilation conditions. For mounting on special walls (such as: steel structure
wall, hollow structure, glass, marble, etc.), it is recommended to evaluate the force bearing
limits of the wall first in case of emergency.
l
Avoid exposing the CenterStage to direct sunlight, as direct sunlight will accelerate the
interactive touch monitor’s aging and may cause the abnormalities of the touch device.
l
To avoid screen damage, do not use hard objects to write on the touch screen
monitor.
For support please contact:
| 866-201-2056
www.thehovercam.com
SECURITY WARNING
