4 Operation
User reference guide
14
Bela08+16I3 + Belar08+16I3
Hoval BelariaSRM and Hoval Belaria compact SRM
4P330441-1 – 2012.11
4 211 876 / 00 – 11/12
To configure the holiday (when you go away)
1
Go to [2]:
> January.
2
Select Away.
3
Configure the holiday mode settings (when you go away).
Possible holiday mode settings (when you go
away)
Setting
Description
From and Until
First and last day of your holiday.
Operation mode
Operation mode used during your holiday.
Heating
Set point used during your holiday when the unit
is operating in heating mode.
Cooling
Set point used during your holiday when the unit
is operating in cooling mode.
To activate or deactivate the holiday mode
Prerequisite:
You have configured the holiday.
1
Go to [2.1]:
> Holiday > Holiday.
2
Do one of the following:
▪ To activate, select Yes and press
.
▪ To deactivate, select No and press
.
Usage example: You go away during the winter
If you are in the following situation:
▪ In 2 days, you go away for 2 weeks during the winter.
▪ You want to save energy, but prevent your house from freezing.
Then you can do the following:
1
Configure the holiday.
Go to [2]:
> Holiday, and configure the following settings:
Setting
Value
Holiday mode
Away
From
2 February 2013
Until
16 February 2013
Operation mode
Heating
Heating
12°C
2
Activate the holiday mode.
▪ Go to [2.1]:
> Holiday > Holiday.
▪ Select Yes and press
.
Advantage:
▪ Before and after your holiday, your normal schedule will be used.
▪ During your holiday, you save energy and prevent your house
from freezing.
Usage example: You come home during your
holiday
If you are in the following situation:
▪ You configured and activated the holiday mode (Away).
▪ During your holiday, you come home for a few hours and want to
use your normal schedule.
Then you can do the following:
1
Deactivate the holiday mode.
2
When you go away again, activate the holiday mode again.
Advantage:
You do NOT have to change your schedule or holiday configuration
(= easy).
4.6.3
Reading out information
About reading out information
The amount of information you can read out in the menu structure
([6]: Information) depends on your user permission level:
▪ End user (= default)
▪ Adv. end user: You can read out more information.
To switch between user permission levels
(End user and Advanced end user)
1
Go to [6] or any of its submenus:
> Information.
2
Press
for more than 4 seconds.
Result:
The user permission level switches to Adv. end user.
Additional information is displayed and "+" is added to the menu
title.
3
If you do NOT press any button for more than 1 hour or press
again for more than 4 seconds, the user permission level
switches back to End user.
To read out information
Go to [6]:
> Information.
Possible read-out information
If user permission level = End user, you can read out the following
information:
In menu…
You can read out…
[6.1] Sensor information
Room, tank and outside
temperature.
[6.2] Energy metering
Energy consumption and
produced energy (only totals).
[6.3] Error handling
Error history and contact/
helpdesk number.
[6.4] User permission level
Current user permission level.
If user permission level = Adv. end user, you can read out the
following additional information:
In menu…
You can read out…
[6.2] Energy metering
Energy consumption and
produced energy (detailed
information).
[6.5] Actuators
Status/mode of each actuator.
Example: Domestic hot water
pump ON/OFF.
[6.6] Operation modes
Current operation mode.
Example: Defrost/oil return
mode.
[6.7] Running hours
Running hours of the system.
[6.8] Version
Version information about the
system.
4.6.4
Configuring date, time, units of
measurement, contrast and backlight
To configure time and date
Go to [1]:
> Set time/date.
To configure units of measurement
Go to [7.6]:
> User settings > Unit of measurement.
Summary of Contents for Belaria compact SRM 11-16/260
Page 23: ......
