13
GB
S
N
DK
EST
FIN
D
CONNECT THE ALARMS
Choose one of the smoke alarms as the Master unit and mark it with an M on the
back, so you know which one it is later on. The master unit is used to send the
radio code to the other alarms, so they all connect up.
1.
Press the LEARN button twice on the MASTER unit. Then the LEARN
button indicator shall be green. That means this unit will be set in learning
mode.
2.
Press the LEARN button of all the other SLAVE alarms that need to be
interconnected. The LEARN button indicator will be red on those units.
MASTER UNIT
X2
SLAVE UNIT
X1