Install outlet gasket
●
Mare sure the roof is dry
,
clean and without oil before installation
.
●
Take off the paper from the back of the outlet gasket
,
and stick the outlet gasket onto the roof over the square hole
.
●
Press the outlet gasket to make sure the outlet gasket is closely adhered to the roof
.
●
Fill the silicon glue around the outlet gasket to make sure no leakage happens
.
Please note the silicon glue cann
’
t touch
the rooftop unit
.
The silicon glue should
go in a close circle
6
Square
(
×
inch
)
hole
14 3/16" 14 3/16"
Plenum position
Position of rooftop unit
Moving direction of caravan
Unit: inch
14 3/16"
14 3/16"
21 1/8"
21 15/16"
26 3/4"
19"
6 1/8"
●
Place the outdoor unit over the outlet gasket and adjust position to make sure the 4 bolts under the outdoor unit are
aligned with the 4 corners of the square hole
(
360 360mm
).
When
×
position of outdoor unit is being adjusted
,
a person
needs to go to the inside of caravan to ensure the alignment
.
●
Do not push or pull the outdoor unit directly
,
otherwise
,
it will cause damage to the outlet gasket and lead leakage of air
and water
.
Install outdoor unit
●
The 4 holes which receives M8 bolts on the base of the outdoor unit should align with the 4 corners of the square
hole
(
360 360mm
)
on
×
the roof
.