10
Note
After selecting the COOL or HEAT mode
,
the compressor may delay starting
for 3 minutes
.
This is a feature to protect the compressor
.
●
Switch on the power to the air-conditioner at the isolation breaker
.
●
Using the remote control
,
start the air-conditioner by pressing
"
"
button and then select fan
function by pressing the
"
MODE
"
button
.
●
Operate in low FAN
,
medium FAN and high FAN in turn to check normal operation
.
●
Select COOL mode
,
adjust the set point temperature to three degrees lower than the room temperature
,
the unit will start to blow cool air after the compressor starts
.
●
Select HEAT mode
,
adjust the setting temperature to three degrees higher than the room temperature
,
the unit will start to blow warm air after the compressor starts
.
Quick
Start
Guide