Hottek HT-957-001, User Manual

Page: 10 / 16

ENG
10
• To keep your hair away from high temperatures, treat them with thermal
protective aid.
• Take a strand of hair and pull it carefully downwards until it is taut. The
remaining hair should be put up or fixed in place. Before the halves are
pressed together for approx. 5 seconds, we recommend that you ensure
that the hair is positioned correctly. Always begin at the base of the hair
and move the device in the direction of the hair tip. In order to produce a
uniform appearance it is important that the next strands fall in one line.
To ensure that the waves are retained for a prolonged period we recom -
mend that you use only a coarse comb or your fingers.
• Repeat this procedure if necessary, until the desired result is achieved.
Secure your hair with styling products.
Cleaning and maintenance
• Unplug and cool down the appliance before cleaning.
• Never put hair dryer and cord into water or other liquid Clean the casing
and plates with a soft, damp cloth, without any additional cleaning agents.
• It is forbidden to use abrasive detergents and solvents for appliance
cleaning.
Storage
• Before putting the appliance away for storage, it is necessary to cool it
down and make sure that its body is clean and dry.
• Never wrap the cord around the unit. This could cause the cord to wear
prematurely and break.
• We designed hanging loop for additional ease of storage, it allows to
keep the appliance safe from water.
• Keep this appliance is a dry, cool place, which is inaccessible to children.
• Electrical equipment have to be stored in a dry place at ambient tem -
perature no higher than plus 40 °C with a relative humidity of 70%, and
the absence of dust, acid and other fumes in surrounding medium which
affect adversely the materials of the electrical devices.
Utilization
After the end of the service life do not discard the unit with household
waste. Hand it at an official collection point for recycling. Doing it you will
help protect the environment.
The manufacturer preserves the right to change the design and the
specifications of the unit without a preliminary notification.