background image

8.780-015.0

 • DA • Rev. 10/09

OPERATOR’S MANUAL

    

PRESSURE WASHER 

 

4

INTRODUCTION & IMPORTANT SAfETY INfORMATION

Thank you for purchasing this Pressure Washer.
We  reserve  the  right  to  make  changes  at  any  time 
without incurring any obligation.

Owner/User Responsibility:

The owner and/or user must have an understanding of 
the manufacturer’s operating instructions and warnings 
before using this pressure washer. Warning information 
should be emphasized and understood. If the operator 
is not fluent in English, the manufacturer’s instructions 
and  warnings  shall  be  read  to  and  discussed  with 
the operator in the operator’s native language by the 
purchaser/owner, making sure that the operator com-
prehends its contents.
Owner and/or user must study and maintain for future 
reference the manufacturers’ instructions.
The  operator  must  know  how  to  stop  the  machine 
quickly  and  understand  the  operation  of  all  controls. 
Never  permit  anyone  to  operate  the  engine  without 
proper instructions.

This manual should be considered a permanent 

part of the machine and should remain with it if 
machine is resold.
When ordering parts, please specify model and 
serial number. Use only identical replacement 
parts.
This machine is to be used only by trained op-
erators.

IMPORTANT SAfETY 

INfORMATION

READ OPERATOR’S 

MANUAL THOROUGHLY 

PRIOR TO USE.

WARNING: To reduce the risk of 
injury,  read  operating  instruc-
tions carefully before using.

  1.  Read  owner's  manual  thor-

oughly.  Failure  to  follow  in-
structions  could  cause  mal-
function  of  the  machine  and 
result in death, serious bodily 
injury and/or property damage.

  2.  Know how to stop the machine and bleed pressure 

quickly. Be thoroughly familiar with the controls.

  3.  Stay alert — watch what you are doing.
 

WARNING

KEEP WATER 

SPRAY AWAY fROM 

ELECTRICAL WIRING.

WARNING: Keep wand, hose, and 
water spray away from electric 
wiring or fatal electric shock may 
result.

4.    All  installations  must  comply 

with  local  codes.  Contact 
your  electrician,  plumber, 
utility company or the selling 
distributor for specific details.

WARNING

EAR PROTECTION 

MUST bE WORN

WARNING:  This  machine  ex-

ceeds  85  db  appropriate  ear 
protection must be worn.

WARNING

USE PROTECTIvE  

EYE WEAR 

AND CLOTHING  

WHEN OPERATING 

THIS EqUIPMENT.

WARNING: High pressure spray 
can cause paint chips or other 
particles  to  become  airborne 
and fly at high speeds. To avoid 
personal  injury,  eye,  hand  and 
foot  safety  devices  must  be 
worn.

  5.   Eye,  hand,  and  foot  pro-

tection  must  be  worn  when 
u s i n g   t h i s   e q u i p m e n t .

  6.  Keep operating area clear of all persons.
 

RISK Of ExPLOSION: 

OPERATE ONLY WHERE 

OPEN fLAME OR TORCH 

IS PERMITTED

WARNING

WARNING:  Flammable  liquids 
can create fumes which can ig-
nite,  causing  property  damage 
or severe injury.
WARNING: Risk of explosion — 
Operate only where open flame 
or torch is permitted.

 

RISK Of fIRE.  

DO NOT ADD fUEL 

WHEN OPERATING 

MACHINE.

WARNING

WARNING: Risk of fire — Do not 
add  fuel  when  the  product  is 
operating or still hot. 
WARNING: Do not use gasoline 
crankcase  draining  or  oil  con-
taining  gasoline,  solvents  or 
alcohol. Doing so will result in 
fire and/or explosion.
WARNING: Risk of fire — Do not 

Spray flammable liquids. 

WARNING: This product contains chemicals known 
to the state of California to cause cancer and birth 
defects or other reproductive harm. Operation of 
this  equipment  may  create  sparks  that  can  start 
fires around  dry vegetation. A spark arrestor may 
be  required.  The  operator  should  contact:  Local 
fire agencies for laws or regulations relating to fire 
prevention requirements.

  7.  Allow engine to cool for 1-2 minutes before refu-

eling. If any fuel is spilled, make sure the area is 
dry  before  testing  the  spark  plug  or  starting  the 
engine. (Fire and/or explosion may occur if this is 
not done.)

Summary of Contents for DA-232336 P COMET



















Reviews: