background image

6

Safety

IMPORTANT SAFETY INFORMATION

WARNING: To reduce the risk of 
injury, read operating instruc-
tions carefully before using.

1.

Read the owner's manual thor-
oughly. Failure to follow instruc-
tions could cause malfunction of 
the machine and result in death, 
serious bodily injury and/or 
property damage.

2.

Know how to stop the machine and bleed pressure 
quickly. Be thoroughly familiar with the controls.

3.

Stay alert — watch what you are doing.

4.

All installations must comply with local codes. 
Contact your electrician, plumber, utility company 
or the selling dealer for specific details. If your 
machine is rated 250 volts or less, single phase a 
ground fault circuit interrupter (GFCI) will be 
provided. If rated more than 250 volts, or more 
than single phase this product should only be 
connected to a power supply protected by a GFCI.

WARNING: Must be plugged into properly wired 
three hole grounded outlet that accommodates 
plug on power cord. Failure to comply could result 
in electrical shock.

DANGER: Improper connection of the equipment-
grounding conductor can result in a risk of electro-
cution. Check with a qualified electrician or service 
personnel if you are in doubt as to whether the 
outlet is properly grounded. Do not modify the plug 
provided with the product - if it will not fit the outlet, 
have a proper outlet installed by a qualified electri-
cian. Do not use any type of adapter with this 
product. 

DANGER: Keep wand, hose, and 
water spray away from electric 
wiring or fatal electric shock may 
result.

5.

To protect the operator from 
electrical shock, the machine 
must be electrically grounded.It 
is the responsibility of the owner 
to connect this machine to a UL 
grounded receptacle of proper 

voltage and amperage ratings. Do not spray water 
on or near electrical components. Do not touch 
machine with wet hands or while standing in water. 
Always disconnect power before servicing.

WARNING: Flammable liquids can create fumes 
which can ignite, causing property damage or 
severe injury.

WARNING: Risk of explosion — 
Operate only where open flame or 
torch is permitted.

6.

In oil burning models, use only 
kerosene, No. 1 home heating 
fuel, or diesel. If diesel is used, 
add a soot remover to every 
tankful.

WARNING: Risk of fire — Do not 
add fuel when the product is 
operating or still hot. 

WARNING: Do not use gasoline 
crankcase draining or oil 
containing gasoline, solvents or 
alcohol. Doing so will result in fire 
and/or explosion.

7.

Oil burning appliances shall be installed only in 
locations where combustible dusts and flammable 
gases or vapors are not present. Do not store or 
use gasoline near this machine.

8.

Do not allow acids, caustic or abrasive fluids to 
pass through the pump.

9.

Never run pump dry or leave spray gun closed 
longer than 1-2 minutes.

10. Keep operating area clear of all persons.

WARNING: High pressure 
spray can cause paint chips or 
other particles to become 
airborne and fly at high 
speeds. To avoid personal 
injury, eye, hand and foot 
safety devices must be worn.

11. Wear properly rated eye protec-

tion such as safety goggles or 
face shield while spraying. 

(Safety glasses do not provide full protection.)

WARNING: This machine exceeds 
85 db appropriate ear protection 
must be worn.

Hotsy 800 OIL FIRED OPERATOR’S 8.921-206.0 - B

WARNING

    READ OPERATOR’S 

 MANUAL THOROUGHLY 

           PRIOR TO USE.

OPERATIONS

SAFET

Y

MAINTENANCE

DANGER

       

KEEP WATER 

 SPRAY AWAY FROM 

ELECTRICAL WIRING.

WARNING

RISK OF EXPLOSION: 

OPERATE ONLY WHERE 

OPEN FLAME OR TORCH 

IS PERMITTED

WARNING

RISK OF FIRE. DO NOT

OPERATE NEAR

FLAMMABLE LIQUIDS

WARNING

    USE PROTECTIVE 

  EYE WEAR 

AND CLOTHING

WHEN OPERATING

 THIS EQUIPMENT.

WARNING

EAR PROTECTION

MUST BE WORN

Summary of Contents for 800 Series

























Reviews: