Page 19
TEMPERATURE LOCK
The TEMPERATURE LOCK feature deactivates the temperature control function of the control panel. TEMPERATURE
LOCK is most often used by people who do not want others to tamper with or change the set temperature of the spa water.
TEMPERATURE LOCK is a submenu of the TOOLS menu
To activate the TEMPERATURE LOCK, press the MODE (
or
) button in the TOOLS submenu until the TLOK-
symbol is displayed on the screen. Press the
(+)
button to activate the TEMPERATURE LOCK feature (TLOK+).
When the TEMPERATURE LOCK is activated, the JETS, LIGHTS and any other features your spa may have will operate normally, and the
temperature setting can be viewed but can NOT be changed. If a temperature button is pressed, TLOK will display for several seconds, then turns
off.
To deactivate the TEMPERATURE LOCK, press the MODE (
or
) button in the TOOLS submenu until the TLOK+ symbol is displayed on the
screen. Press the
(-)
button to deactivate the TEMPERATURE LOCK feature.
SPA LOCK
The SPA LOCK feature deactivates all of the functions of the control panel. It is generally used to prevent unwanted
use of the spa. The SPA LOCK menu is a submenu of the TOOLS menu.
To activate the SPA LOCK, press the MODE (
or
) button in the TOOLS submenu until SLOK- is displayed on the
screen. Press the
(+)
button to activate the SPA LOCK feature.
When the SPA LOCK is activated, the buttons for the jets, temperature control, light, and any other features your spa may have are deactivated. If Jets,
Light button, or
(+)
or
(-)
button is pressed, the SLOK will display for several seconds, then turns off.
To deactivate the SPA LOCK, press the MODE (
or
) button in the TOOLS submenu until the SLOK+ symbol is displayed on the screen. Press
the
(-)
button to deactivate the SPA LOCK feature.
LOCK OVERRIDE
The Lock Override feature is for spa users who normally keep the set temperature locked. Should the user wish to lock all spa controls temporarily,
the spa lock can be applied over an already-applied temperature lock. Then, when the spa lock is removed, the temperature lock will remain on to
prevent unwanted tampering with the set temperature.
LIGHT - MULTI-COLOR MENU CONTROLS (
TEMPO
,
RELAY
&
RHYTHM
ONLY)
Your spa lights can display a variety of different colors as well as run through a continuous sequence of colors (loop) at different speeds. To activate
this function the following is required:
Press the MODE (
or
) button to scroll to the TOOLS screen. Once displayed, press the
(+)
button to enter the TOOLS submenu. Press the
MODE (
or
) button to scroll to LIGHT screen, press the
(+)
button to enter DIM, screen. Press the
(+)
button or
(-)
button in the DIM screen to
adjust the brightness of the lights. Press the MODE (
) button to scroll to Color screen. Press the
(+)
button or
(-)
button in the COLOR screen as
many times as desired to toggle through the different light colors. Press the MODE (
) button to scroll to Loop screen. Press the
(+)
button or
(-)
button in the LOOP screen to select a continuous sequence of colors, the higher the loop number the faster the color sequence will run. Press the
MODE (
) button to scroll to EXIT screen. Press the
(+)
button in the EXIT screen to exit the LIGHT menu.
If the light is turned off while in the LOOP or COLOR mode, the same mode will exist when the light is reactivated. You will see a flashing light icon
whenever your LOOP mode and light are turned on.
SLEEP MODE
The Sleep Mode operation is a feature that minimizes pump operation during quiet evening hours. For example, if Filter Cycle 1 (F1) is set to
activate at 8:00 a.m., by default, Filter Cycle 2 (F2) will activate at 8:00 p.m. (12 hours later). During 8:00 p.m. to 8:00 a.m., if the spa should call
for heat, the pump and heater will activate to heat the spa under normal temperature demand. However, when in Sleep Mode, should the spa
call for heat, the pump and heater will be suspended after Filter Cycle 2 (F2) until the activation of Filter Cycle 1 (F1), at 8:00 a.m. to minimize pump
activation during quiet evening hours.
Important:
Power-up of the spa starts the F1 sequence. In order for the sleep mode to work in the evening hours, the spa must be powered up
in the early morning hours. The Sleep Mode will always be active the 6-12 hours between the end of (F2) and the beginning of (F1) depending on
how the filter cycle program is set.
Note:
If temperature drops below 80º F (27º C), heater will automatically activate to prevent spa from freezing.
To activate Sleep Mode feature:
A. Press the MODE (
or
) button until the TOOLS screen is displayed.
B. Press the
(+)
button to enter the TOOLS submenus.
C. Press the MODE (
or
) button until ECON is displayed.
D. Press the
(+)
button to activate Sleep Mode. Moon & Stars icon will appear on the screen of the control panel,
indicating this feature has been activated.
To deactivate this feature, simply repeat steps A-C then press the
(-)
button.
Operating Instructions
Page 19
