background image

Page 3

IMPORTANT  

SPA INSTRUCTIONS

The following contains important spa information, and we strongly 

encourage you to read and apply them.

DO:

•  Use and lock the vinyl cover when the spa is not in use, whether it is 

empty or full.

•  Follow the Spa Care and Maintenance recommendations stated in this 

manual.

•  Use only approved accessories and recommended spa chemicals and 

cleaners.

•  Provide adequate drainage to deal with overflow water.

DON'T  

•  Leave the 

HOT SPRING

 spa exposed to the sun without water or the 

cover in place. Exposure to direct sunlight can cause solar distress of 

the shell material.

•  Roll or slide the spa on its side. This will damage the siding.
•  Lift or drag the vinyl cover by using the cover lock straps; always lift or 

carry the cover by using the handles.

•  Attempt to open the electrical control box. There are no user 

serviceable parts inside. Opening of the control box by the spa owner 

will void the warranty. If you have an operational problem, carefully go 

through the steps outlined in the Troubleshooting section. If you are 

not able to resolve the problem, contact your authorized 

HOT SPRING

 

dealer. Many problems can easily be diagnosed over the telephone by 

an Authorized Service Technician.

SPA SHELL

Your 

HOT SPRING

 spa has an acrylic shell. Stains and dirt generally 

will not adhere to your spa’s surface. A soft rag should easily remove 

most dirt. Most household chemicals are harmful to your spa’s shell 

(see below for detailed information on cleaning agents). Always rinse off 

any spa shell cleaning agent with fresh water.

IMPORTANT:
1.  The following products are the ONLY approved cleaning agents 

for your 

HOT SPRING

 

spa shell: plain water,

 

HOT SPRING 

Freshwater

®

 Spa Shine, or Soft Scrub

®

. The use of alcohol or any 

other household cleaner other than those listed to clean the spa shell 

surface is NOT recommended. DO NOT use any cleaning products 

containing abrasives or solvents since they may damage the shell 

surface, specifically: Simple Green

®

, Windex

®

 or Spa Mitt. NEVER 

USE HARSH CHEMICALS! Damage to the shell by use of harsh 

chemicals is not covered under the warranty. Always rinse off any 

spa shell cleaning agent with fresh water.

2.  Iron and copper in the water can stain the spa shell if allowed to go 

unchecked. Ask your 

HOT SPRING

 

dealer about a Stain and Scale 

Inhibitor to use if your spa has a high concentration of dissolved 

minerals. (

WATKINS WELLNESS

 recommends 

FRESHWATER

 

Stain & Scale Defense.)

3.  Keep all cleaners out of the reach of children and use care when 

applying.

Safety Information

SAVE THESE INSTRUCTIONS

Summary of Contents for Hot Spot Propel













































Reviews: