12 of 27
Service Manual UK
Indesit
Company
English
TO STOP OR CHANGE A PROGRAMME
Press the ON-OFF button for approximately 3 seconds.
Select PUMP OUT on the programme dial.
Switch on and re-start.
When the machine has finished emptying.
Press the ON-OFF button.
Select a new programme and re-start.
NOTE:
If you cancel a HOT wash or Dry programme, take care when removing the laundry, it may still
be VERY HOT.
DOOR LOCKED INDICATOR LIGHT
The 'Door Locked' indicator light will come on when you press the START / PAUSE button and will stay
lit throughout the programme. When the programme has finished the indicator light will go out and you
can then open the door, a double CLUNK noise will be heard from the door lock Solenoid at this point.
If the door is not closed properly prior to starting a programme the door lock solenoid will 'CLUNK'
approximately 5 times followed by a flashing DOOR indication in the display window, every 5 seconds
from then onwards there will be an audible beep.
Push the door closed and press START / PAUSE button to commence the cycle.
STAND-BY MODE
This washing machine, in compliance with new energy saving regulations, is fitted with an automatic
stand-by system which is enabled after about 30 minutes if no activity is detected. Press the ON-OFF
button briefly and wait for the machine to start up again.
