32 of 33
Service Manual UK
Indesit
Company
English
U
Inner Drum Lifter
1.
Insert a small screwdriver onto the 6th lifter hole from the front of the drum.
This will depress the drum flap securing the lifter.
2.
Slide the lifter to the front of the drum and remove.
3.
Before refitting, lift the drum locking tab 3 mm above the drum surface.
4.
Offer the lifter to the holes in the drum, slide lifter to the back of the drum until a click is heard as
the lifter is locked into place.
V
Drum Assembly
1.
Remove the Table Top (A), Rear Access Panel (B), Console Panel (D), Dispenser (S) and Motor
(L).
2.
Remove the screws securing pump to front panel.
3.
Disconnect the wiring attached to the outer drum via cable clips and any earth wires.
4.
Disconnect the tube from the pressure switch.
5.
Unclip the dispenser outlet hose from the dispenser and remove door seal from front panel.
6.
Insert slide Part No. C00222704 (5600155), inside the cabinet at the rear of the drum.
7.
Using suitable protection lay appliance on its back.
8.
Remove 2 x 10 mm nuts securing the shock absorbers to the base of the cabinet.
9.
Remove the tank/pump hose.
10. Carefully slide the outer drum clear, protecting any wiring.
6th hole from the front
