10 of 33
Service Manual UK
Indesit
Company
English
DOOR LOCKED INDICATOR LIGHT
The 'Door Locked' indicator light will come on when you press the START / PAUSE button and will stay
lit throughout the programme. When the programme has finished the indicator light will go out and you
can then open the door, a double CLUNK noise will be heard from the door lock Solenoid at this point.
If the door is not closed properly prior to starting a programme the door lock solenoid will 'CLUNK'
approximately 5 times followed by a flashing DOOR indication in the display window, every 5 seconds
from then onwards there will be an audible beep.
Push the door closed and press START / PAUSE button to commence the cycle.
Stand-by Mode:
These machines, in compliance with new energy saving regulations, are fitted
with an Automatic Stand-by System which is enabled after 30 minutes if no
activity is detected.
Press the On/Off button briefly and wait for the machine to start up again.
OPTIONS
Options are selected by pressing the button and confirmed by illumination an orange LED situated in
the button.
If an option is not available with a programme, the LED will flash and a bleeping noise will be heard
when pressing the button.
SUPERWASH
An intensive wash using an increased volume of water during the initial phase of the cycle which
increases the cycle duration.
Not available with programmes 5, 8, 9, 10, 11, 12, 13, A, B, C.
EXTRA RINSE
For large wash loads and items for young children or people with sensitive skin.
Not available with programmes 13, B, C.
MINI LOAD
This option is recommended if the wash load is equal to or less than half the recommended load.
In addition to reducing the actual wash time, this option will reduce the water and energy consumption
by 50%.
Not available with programmes 5, 11, 12, 13, B, C.
REDUCED CREASES
By selecting this option the wash and spin cycles will be modified in order to reduce creases.
At the end of the cycle the drum will turn periodically and the Start/Pause and Reduce Creases lights
will flash Orange and End of Cycle will appear in the display.
To complete the programme, press Start/Pause or the Reduced Creases button.
If it is used with Silk/Curtains Cycle, the machine suspends the wash load in water with Start/Pause
and Reduced Creases lights flashing Orange.
To complete the programme (pump out the water) press either of the Start/Pause or Reduced Creases
buttons.
Not available with programmes 6, 9, 11, 12, 13, B, C.
