background image

12

GB

Care and maintenance

 

Cutting off the water and electricity sup-

plies

• 

Turn off the water tap after every wash cycle. This will 
limit wear on the hydraulic system inside the washing 
machine and help to prevent leaks.

• 

Unplug the washing machine when cleaning it and du-
ring all maintenance work.

Cleaning the washing machine

The outer parts and rubber components of the applian-
ce can be cleaned using a soft cloth soaked in lukewarm 
soapy water. Do not use solvents or abrasives.

Cleaning the detergent dispenser drawer

Remove the dispenser by 
raising it and pulling it out 
(see figure).
Wash it under running wa-
ter; this operation should 
be repeated frequently.

Caring for the door and drum of your ap-

pliance

• 

Always leave the porthole door ajar in order to pre-
vent unpleasant odours from forming.

Cleaning the pump

The washing machine is fitted with a self-cleaning pump 
which does not require any maintenance. 

Checking the water inlet hose

Check the inlet hose at least once a year. If there are 
any cracks, it should be replaced immediately: during the 
wash cycles, water pressure is very strong and a cra-
cked hose could easily split open.

!

 

Never use second-hand hoses.

1

2

Cleaning the pump

The washing machine is fitted with a self-cleaning pump 
which does not require any maintenance. Sometimes, 
small items (such as coins or buttons) may fall into the 
pre-chamber which protects the pump, situated in its 
bottom part.

 

!

  

Make sure the wash cycle has finished and unplug the 

appliance.

To access the pre-chamber:

1. using a screwdriver, 
remove the cover panel 
on the lower front part of 
the washing machine (see 
figure);

2. unscrew the lid by rota-
ting it anti-clockwise (see 
figure): a little water may 
trickle out. This is per-
fectly normal;

3. clean the inside thoroughly;
4. screw the lid back on;
5. reposition the panel, making sure the hooks are secu-
rely in place before you push it onto the appliance.

Checking the water inlet hose

Check the inlet hose at least once a year. If there are 
any cracks, it should be replaced immediately: during the 
wash cycles, water pressure is very strong and a cra-
cked hose could easily split open.

!

 

Never use second-hand hoses.

Summary of Contents for WMF 720 A

















Reviews: