background image

!

The machine was designed and built in compliance

with the applicable international safety regulations.
The following information is provided for your safety
and should consequently be read carefully.

General safety

This machine should only be used by adults and 
in accordance with the instructions provided in this 
manual.

Do not overload the machine. In addition to 
reducing the quality of the wash, this may also 
damage your laundry and the machine.

Never touch the machine when barefoot or with 
wet or damp hands or feet.

Do not pull on the power supply cable to unplug 
the appliance from the electricity socket. Pull the 
plug out.

Do not open the machine door while the 
appliance is in operation.

Do not open the detergent dispenser while the 
appliance is in operation.

Do not touch the drain water as it could reach very 
high temperatures.

Never force the machine door: this could damage 
the safety lock mechanism designed to prevent 
any accidental opening.

In the event of a malfunction, do not under any 
circumstances touch internal parts in order to 
attempt repairs.

Always keep children well away from the 
appliance while in operation. Do not let children 
play with the machine or tamper with the controls.

The appliance door tends to get quite hot during 
the cycle.

Should it have to be moved, proceed with the 
help of two or three people and handle it with the 
utmost care. Never try to do this alone, because 
the appliance is very heavy.

Before loading your laundry into the machine, 
make sure the drum is empty.

In the unlikely event of something not working - 
see the Troubleshooting section. 

Saving energy and respecting the 
environment

Environmentally-friendly technology

If you only see a little water through your appliance
door, this is because thanks to the latest Hotpoint 
technology, your machine only needs less than half
the amount of water to get the best results: an 
objective reached to respect the environment.

Saving on detergent, water, energy and time

To avoid wasting resources, the machine should 
be used with a full load. A full load instead of two 
half loads allows you to save up to 50% on energy.

The pre-wash cycle is only necessary on 
extremely soiled garments. Avoiding it will save 
on detergent, time, water and between 5 and 
15% energy.

Treating stains with a stain remover or leaving 
them to soak before washing will cut down the 
need to wash them at high temperatures. 
A pro gramme at 60˚C instead of 90˚C or one at 
40˚C instead of 60˚C will save up to 50% on 
energy.

Use the correct quantity of detergent, depending 
on the water hardness, how soiled the garments 
are and the amount of laundry you have, to avoid 
wastage and to protect the environment: despite 
being biodegradable, detergents do contain 
ingredients that alter the natural balance of the 
environment. In addition, avoid using fabric 
softener as much as possible.

If you use your machine between late in the 
afternoon and the early hours of the morning, you 
will help reduce the electricity board’s peak load.

Recycling and Disposal information

As part of Hotpoint’s continued commitment to helping
the environment, Hotpoint reserve the right to use
quality recycled components to keep down customer
costs and minimise material wastage.

Please dispose of packaging and old appliances 
carefully.

To minimise risk of injury to children, remove the 
door and plug - then cut off mains cable,flush with 
the appliance. Dispose of these parts separately to 
ensure that the appliance can no longer be 
plugged into a mains socket, and the door cannot 
be locked shut.

Precautions and advice

11

GB

Summary of Contents for WD420

















Reviews: