background image

Options

Rinse Hold

This option holds clothes in the final rinse water, keeping them fresh
until you are ready to complete the programme

To use this option press the ‘Rinse Hold’ button once, illuminates in the
display window above the ‘Rinse Hold’ option button. Complete the final spin
by pressing the ‘Rinse Hold’ button again when the symbol is flashing.

This option is not available with Wool, Fast Wash and the Spin only
programmes.

Time Saver

This option can be used to reduce the time of a wash programme.

To use this option press the ‘

Time Saver

’ option button once before the wash

programme is started, the chevron progress lights will illuminate.

This option is not available with Wool, Silk, Hand Wash, Fast Wash, Super 
Wash and Rinse and Spin programmes.

PROGR

AMMES

AND  OPTIONS

Automatic Features

Auto half load

Auto half load saves you time and money when washing smaller loads. Water levels
are automatically adjusted to cater for the different loads.

Unbalanced load warning

Your machine has an inbuilt feature to prevent it spinning with an unbalanced load.
This will minimise excessive vibration and prolong the life of the machine.
Before each spin the machine ‘senses’ the load within the drum and if the machine
considers the load to be unbalanced, it will not automatically spin. Instead the
machine will try to redistribute the load to achieve balance by tumbling backwards
and forwards. If it is unable to balance the load after the sixth attempt the machine
will abort the spin process.
If this safety feature is encountered you can spin the load, after first opening the door,
redistributing the load and reselecting a fast or slow spin programme. In the case of
small loads or single items you may try adding some extra items of a comparable size
to help balance the load.

21

Rinse Hold Time Saver

Summary of Contents for Ultima WF840





























Reviews: