background image

When you are using
the pre-wash option
with your selected
programme add
detergent to  the
pre-wash
compartment
(

l

symbol).

Add the detergent
for the main wash
to the main
compartment
(

ll

symbol).

Dispensing liquid detergent

We recommend the use of a detergent dosing ball, as provided by your
detergent manufacturer.

Using in-drum
dosing

Pre-wash

Dispensing tablets

Dispensing powder detergent

To achieve the best wash results the
manufacturer’s recommended amount
of detergent should be measured and
added to the main detergent compart-
ment (II symbol) (max. 400ml).

Adding fabric
conditioner

Pour the
recommended
dosage of fabric
conditioner into
the compartment
(flower symbol).
Do not exceed the
maximum fill line.

14

WARNING:

Do not put any
item(s) into
the drawer
other than
detergents
that are
designed to be
released from
the drawer as
they may cause
damage or
blockage.

Most tablets are dispensed via the machine drum using a net,
or similar device, which is placed on top of the washload
towards the back of the drum. However, some tablets are
designed to be placed in the dispenser drawer. Check the
pack for details.

Dosing devices -
balls, nets etc can
be used.

Place upright, on
top of the wash
load and towards
the back of the
machine.

DO NOT use with
the pre-wash
option.

THE

DISPENSER

Summary of Contents for Ultima WF840





























Reviews: