background image

6

GB

Selecting your language

The Display

Understanding the display

Programme selection and display

The selected programme is shown on the first line of the display, 
this message is shown while the programme is running.
Eight of the buttons have two selections, press the button once for the 
first choice and press again for the second choice, your selected 
programme is displayed.  The final button selects My Cycle.

First Press

Second Press

1

2

3

4

5

6

7

8

9

MY CYCLE (

see below

)

My Cycle 

When you select the My Cycle button the Display will show your selected programme with ‘M’ before its

name.  ie.  M  COTTONS  (

see Start and Programmes

).

The second line of the display shows the dryness level you require, for each 
press of the       Dryness Level button the next option from the list below is
selected and displayed. The display also shows 1 to 7 bars depending on
your selection and these are displayed during the programmes progress.  

COTTONS

BED & BATH

SYNTHETICS

JEANS

WOOL

BABY DELICATES

CUDDLY TOYS

EASY IRON

The first time you turn on your dryer you should select your preferred language from the available list.

DAMP

Dries your items ready to be ironed using a machine or rotary ironer.

IRON DRY

Dries your items ready to be ironed with a hand iron.

HANGER PLUS

Dries your delicate items ready to be hanged for final drying.

HANGER DRY

Dries your items ready to be hanged for final drying.

LIGHT DRY

Dries your delicate items ready to be put away.

CUPBOARD DRY

Dries your items ready to be put away.

EXTRA DRY

Dries your clothes ready to be worn.

!

Some automatic programmes do not allow the dryness level to be changed

or do not have all the dryness level options.

Dryness levels

During programme selection for an automatic programme that has different dryness levels available (

see Programmes

Table

).

To change:

the language current selection must flash, on

the first line of the display.

- Press the On/Off button to turn off the display then press 

and hold all 3 buttons:       

Heat Level

,      

Timed Dry

and      

Dryness Level

for 5 seconds.

- Press the      Heat Level or the      Timed Dry button to

scroll up or down through the list.

- When your required language is flashing on the top line 

of the display, pressing the      Dryness Level button will
select your choice. 

SHIRTS

ANTI ALLERGY

TURBO DRY

DUVET

SILK

DARK

HEAT & ENJOY

REFRESH   

Summary of Contents for TCUD 97B





















Reviews: