5
Dryer Description
GB
Impor
tant
Inf
ormation
Installation
Description
The Displa
y
Star
t and
Pr
ogrammes
Laundr
y
W
a
rnings and
Sug
g
estions
T
ro
u
b
leshooting
S
e
rv
ic
e
Maintenance
and Care
Control panel
PROGRAMME
Selection Buttons
Display Unit
START/PAUSE
Button & Light
ON/OFF
Button
CHILD LOCK &
OPTIONS
Buttons & Lights
The features
Water container
Filter
Condenser cover
flashing green if on standby waiting to start a programme
(
see Start and Programmes
).
Note:
This light also flashes amber during the Post
Care phase of a programme.
The
Display Unit
gives warnings and information
about the programme selected and its progress (
see
next page
).
The
CHILD LOCK
button/icon : Press and hold this
button after selecting your programme and any options,
this prevents the programme settings from being
changed, the display will briefly show LOCKED .
When the icon is lit, the other buttons are disabled.
Hold the button to cancel and the icon will go out, the
display will briefly show UNLOCKED .
Note
: This tumble dryer, in compliance with new energy
saving regulations, is fitted with an automatic standby
system which is enabled after about 30 minutes if no
activity is detected. Press and hold the ON-OFF
button until the display briefly shows POWER ON
and the dryer then reactivates.
Rating plate
Model & Serial numbers
Condenser cover handle
(Pull to open)
Air intake grille
The
ON/OFF
button - if pressed when the dryer is
running: If the display shows TURNING OFF the
dryer stops. If the display shows PRESS AND HOLD
hold the botton and the display counts down 3, 2, 1
and then stops.
Press and hold again for more than 3 seconds, the
display briefly shows POWER ON .
The
PROGRAMME
selection buttons set the programme:
press the button corresponding to the programme you
want to select (
see Start and Programmes
).
The
OPTION
buttons/indicators: these buttons select
available options for your selected programme (
see
The Controls
). The indicators on the display unit next
to the bottom buttons light to show that the option has
been selected.
The
START/PAUSE
button/light starts a selected
programme. When a programme is running, holding this
button in pauses the programme, there will be one
beep,the display will show PAUSE and the dryer
stops.
The light is green when the programme is running,
flashing amber if the programme has been paused or
