manualshive.com logo in svg

Hotpoint MWH 424.1 X, Service Information

Share
Download
Hotpoint MWH 424.1 X Service Information Download Page 8

8 of 45

Service Manual UK

Indesit

Company

English

INSTALLATION

Read these instructions carefully before using your microwave oven, and keep it carefully.
If you follow the instructions, your oven will provide you with many years of good service.

! SAVE THESE INSTRUCTIONS CAREFULLY PRECAUTIONS TO AVOID POSSIBLE EXPOSURE 
TO EXCESSIVE MICROWAVE ENERGY.

a)

Do not attempt to operate this oven with the door open since this can result in harmful exposure to 
microwave energy. It is important not to break or tamper with the safety interlocks.

b)

Do not place any object between the oven front face and the door or allow soil or cleaner residue 
to accumulate on sealing surfaces.

c)

WARNING: If the door or door seals are damaged, the oven must not be operated until it has been 
repaired by a competent person.

ADDENDUM

If the apparatus is not maintained in a good state of cleanliness, its surface could be degraded and 
affect the life span of the apparatus and lead to a dangerous situation.

Important information about installing

This appliance is NOT intended for use in a commercial environment.

Placement

•

Danger! Do not disassemble this appliance. Touching internal components of this appliance can 
cause serious personal injury or death.

•

Place the microwave oven on a firm, flat surface.

•

Make sure that there is sufficient ventilation around the microwave oven. At the rear and sides 
keep at least 10 cm free.

•

Do not cover the air vents.

•

The adjustable feet should not be removed.

•

Do not place the microwave oven near a heat source.

•

Transmitting and receiving equipment such as radios and televisions can affect the operation of 
the microwave oven.

 The accessible surface may be hot during operation.

100

600

min 580

560-568

455

22

558-568

min 460

542

540

min. beluchtingsopp. 250 cm

2

min. beluchtingsopp. 
250 cm

2

450

600

min
550

min 580

560

20

min

min.
550

min. aeration surface 250 cm

2

min. aeration surface 
250 cm

2

454.5

458+2

595

594

595

568

455

454.5

444

45

550

455

22

542

20

454.5

595

594

595

568

455

454.5

444

550

560

600

Installation Diagrams

Note: There should be
a gap above the oven

Summary of Contents for MWH 424.1 X














































Reviews:

No comments

Brands by name

Popular brands

Load more brands