40 of 45
Indesit
Company
Service Manual UK
English
T.
Convector Assembly (Includes Fan Motor & Rear Heater)
1.
Release the microwave from its housing.
2.
Remove the cabinet top (A).
3.
Remove the cabinet back panel (B).
4.
Disconnect the wiring and remove the two 7mm nuts.
5.
Remove the ten screws and lift away.
6.
On re-fitting, ensure that the rubber seal is placed in the location holes. See Figs. 43-46.
U.
Rear Thermostat
1.
Release the microwave from its housing.
2.
Remove the back panel (A).
3.
Disconnect the wiring.
4.
Remove the one screw and bend the tag.
5.
Lift clear from the convector. See Fig. 47.
Fig. 43
Fig. 44
Fig. 45
Fig. 46
Fig. 47
