8
INTERIOR AND EXTERIOR SURFACES
• Clean the surfaces with a damp microfibre cloth. If
they are very dirty, add a few drops of pH-neutral
detergent. Finish off with a dry cloth.
• Clean the door glass with a suitable liquid
detergent.
• At regular intervals or in case of spills, remove the
turntable and its support to clean the bottom of the
oven, removing all food residue.
• The grill does not need to be cleaned as the
intense heat burns away any dirt: Use this function on
a regular basis.
ACCESSORIES
All accessories are dishwasher safe with the exception
of the crisp plate.
The crisp plate should be cleaned using water and a
mild detergent. For stubborn dirt, rub gently with a
cloth. Always leave the crisp plate to cool down
before cleaning.
CLEANING
TROUBLESHOOTING
Make sure that the oven has cooled down before
carrying out any maintenance or cleaning.
Do not use steam cleaners.
Do not use wire wool, abrasive scourers or
abrasive/corrosive cleaning agents, as these could
damage the surfaces of the appliance.
WWW
Download the Use and Care Guide at
www.hotpoint.eu
for more information
CONTACTING OUR AFTER-SALES SERVICE
You can find our contact
details in the warranty
manual. When contacting
our After-sales Service,
please state the codes
provided on your
product's identification
plate.
XXX/XXX
TECHNICAL SPECIFICATION
WWW
A complete specification for the product,
including energy efficiency ratings, can be downloaded
from our website
www.hotpoint.eu
HOW TO OBTAIN THE USE AND CARE GUIDE
>
WWW
Download the Use and Care Guide
from our website
www.hotpoint.eu
(you can use this QR code), specifying the
product's commercial code.
> Alternatively, contact our After-sales
Service
4 0 0 0 1 0 8 5 0 9 2 6
Printed in Italy
001
Problem
Possible cause
Solution
The oven is not working.
Power cut.
Disconnection from the mains.
Check for the presence of mains electrical
power and whether the oven is connected
to the electricity supply. Turn off the oven
and restart it to see if the fault persists.
The oven is making noises, even
when it is switched off.
Cooling fan
active.
Open the door or wait until the cooling
process has finished.
The display is showing “Err”.
Software fault.
Contact you nearest After-sales Service Centre
and state the letter or number that follows
“Err”.
