EN
23
Notes:
Optimum performance levels when using the “Fast" and "Express 40’” cycles can be achieved by respecting the specified number
of place settings.
To reduce consumption even further, only run the dishwasher when is full.
Note for Test Laboratories:
for information on comparative EN testing conditions, please send an email to the following address:
Wash cycles
Wash-cycle data is measured under laboratory conditions according to European Standard EN 50242.
Based on the different conditions of use, the wash-cycle duration and data can change.
The number and type of wash cycles and options may vary depending on the dishwasher model.
Wash cycle
Wash cycle
which
include
drying
Options
Approximate
duration of wash
cycles
Water
consumption
(l/cycle)
Energy
consumption
(KWh/cycle)
Eco*
Yes
No
03:10’
11
1,04
Intensive
Yes
No
02:30’
16,5
1,75
Express 40’
No
No
00:40’
9
1
Half Load wash
Yes
No
01:20’
12
1,15
Instructions on wash-cycle selection and detergent dosage
1.
The ECO wash cycle is the standard cycle to which the energy label data refers. It can be used to wash crockery with a normal
soil level and is the most efficient cycle in terms of energy and water consumption for this type of crockery. 29 gr/ml + 6 gr/ml** – 1
Tab (**Quantity of pre-washing detergent)
2.
Heavily soiled dishes and pans (not to be used for delicate items). 35 gr/ml – 1 Tab
3.
Fast cycle to be used for slightly dirty dishes (ideal for 2 place settings) 25 gr/ml – 1 Tab
4.
Ideal cycle for small loads of crockery with a normal soil level. 25 gr/ml – 1 Tab
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W.
Summary of Contents for LFB 4M010
Page 27: ...EN 27...
