Hotpoint Aquarius VTD00, Instructions For Installation And Use Manual

Page: 2 / 16

Important Information
GB
!
You MUST clean the fluff filter after EVERY drying
cycle.
Fluff filter...
! Failure to clean the filter after EVERY drying cycle will affect the drying performance of your machine.
- It will take longer to dry and as a result will use more electricity during drying.
STEP 1.
Open the door of your
dryer. STEP 2.
Pull out the filter (using
the two finger grips).
STEP 3.
Clean any fluff deposits
from the filter mesh.
For your Venting dryer to operate efficiently, you must follow the regular maintenance schedule shown below:
STEP 4.
Refit the filter.
- Make sure the arrows
are facing you. STEP 5.
Make sure the filter is
pushed fully home - NEVER
run the dryer without the
filter in position.
! You MUST clean fluff build up around the filter housing and the vent tube periodically, EVERY two or three months:
- Check the vent tube and any permanent venting fixture to make sure that there has been no accumulation
of fluff or lint, and remove it.
- Remove lint that collects around the filter and the outlet vents.