29 of 33
Indesit
Company
Service Manual UK
English
D Display Board
1. Remove the door assembly (C).
2. Remove the display boards cover (5 screws).
3. Remove the display board by releasing the clips
holding the board in place and pushing slightly on
the knob.
E
Top Concrete Weight
1. Remove the top cover (A).
2. Remove the counterweight fixing springs, see Page 18.
3. Lift clear.
F
Dispenser/Valve Assembly
1. Remove the top cover (A).
2. Remove the drawer.
3. Remove screw securing the dispenser to the cabinet.
4. Remove the valve support plate screws and valve wiring.
5. Unhook the dispenser outlet hose from the dispenser.
6. Remove the wires, lift clear and remove the fill valves.
G Fill Valves
1. Remove the top cover (A).
2. Remove the valve support plate screws from the back panel.
3. Remove the screws securing the valve to the dispenser.
4. Disconnect the wiring.
H Door Seal
1. Remove the top cover (A).
2. Remove the outer wire clamp, attaching the door seal to the cabinet.
3. Release the door seal from the cabinet front and disconnect the plug connector to the lamp in the
door seal.
4. Remove the door seal from the tank front. The seal is fixed to the tank front by a sprung ring.
