Installation Maintenance and care
Instruction
for installing the waste control
system , in related models:
Install the
waste control knob as shown (See figure C)
!
Adjust variable screw (a) and tighten the nut (b) firmly
! Adjust variable screw
(a)
and ti
ghten the nut
(
b
)
firmly
B
B
B
A
A
A
111...
222...
333...
Cleaning the sink
For the daily use it is advisable to clean the sink
using either neutral detergents or vinegar based de-
tergents.
After using and rinsing the sink it should be dried
with an absorbent cloth to avoid limestone deposits
and generate hereof whitened areas. Should these
occur use a common limestone remover or descaler
according the instructions for use on the bottle.
!
Avoid leaving wet sponges, salt, corrosive
substances or very hot objects on the sink for long
periods of time. Lines and scratches may be
caused by improper use of the sink, so avoid using
it as a work surface for cutting things.
!
Avoid the use of abrasives or cleansers, powdered
detergents and sponges with an abrasive surface,
as these can all scratch the surface irredeemably.
!
Never use steam or high-pressure cleaning sys-
tems to clean your sink.
!
For more stubborn stains use a cloth dampened
with methylated spirit and wipe the stains away.
Call our Parts team on 08448 225 225 or
visit www.hotpointservice.co.uk where
you can purchase a wide range of care
products to prolong and enhance the life
of your appliance
Disposal
When disposing of packaging material: observe
local legislation so that the packaging may be
reused.
EN
8
