Hotpoint Ariston FK 1037ENP.20 X/HA S, Operating Instructions Manual

Page: 25 / 64

GB
25
temperature to 40°C. Place the bowl inside and leave
the dough to rise for approximately 1 hour (the dough
should double in volume).
• Cut the dough into equal sized loaves.
• Place them in the dripping pan, on a sheet of baking
paper.
• Dust the loaves with flour.
• Make incisions on the loaves.
• Place the food inside the oven while it is still cold.
• Start the
BREAD cooking mode.
• Once baked, leave the loaves on one of the grill racks
until they have cooled completely.
BAKED CAKES mode
This function is ideal for cooking desserts which are made
using natural yeast, baking powder and desserts which
contain no yeast. Place the dish in the oven while it is still
cold. The dish may also be placed in a preheated oven.
TARTS mode
This function is ideal for all tart recipes (which normally need
to be heated well from underneath). Place the food inside
the oven while it is still cold.
The dish may also be placed in a preheated oven.
Programming cooking
! A cooking mode must be selected before programming
can take place.
!
Once a cooking mode has been selected, the button
is activated; it will then be possible to program a duration.
The
button is only activated after a duration has been
set; it will then be possible to program a delayed start.
Programming the duration
1. Press the button; the button and the numbers on
the TIME display will flash.
2. Set the duration by pressing buttons “ ” and “ ”.
3. Once you have reached the desired duration, press the
button again.
4. Press the button to begin cooking.
5. When cooking has finished, “END” appears on the
TEMPERATURE display and a buzzer sounds.
• For example: it is 9:00 a.m. and a duration of 1 hour and
15 minutes is programmed. The programme will stop
automatically at 10:15 a.m.
Programming delayed cooking
!
A cooking duration must be set before the cooking end
time can be scheduled.
!
For the delayed programming to work properly, the clock
should be set to the correct time.
1. Press the button and repeat steps 1 to 3 as described
for the duration setting.
2. Then press the
button and set the end time using
the “ ” and “ ” buttons.
3. Once you have reached the desired end time, press the
button again.
4. Press the button to activate the programmed mode.
The and buttons will flash alternately to indicate that
programming has taken place; in the time before cooking
starts, the TIME display will show the duration and the
cooking end time alternately.
5. Once cooking has finished, “END” appears on the
TEMPERATURE display and a buzzer sounds.
• For example: it is 9:00 a.m. and a time of 1 hour and 15
minutes is programmed, while the end time is set to 12:30.
The programme will start automatically at 11:15 a.m.
To cancel programming press the button.
Practical cooking advice
!
Do not place racks in position 1 and 5 during fan-assisted
cooking. This is because excessive direct heat can burn
temperature sensitive foods.
!
In the GRILL and FAN GRILLING cooking modes,
particularly when using the rotisserie spit, place the dripping
pan in position 1 to collect cooking residues (fat and/or
grease).
MULTILEVEL
• Use positions 2 and 4, placing the food which requires
more heat on 2.
• Place the dripping pan on the bottom and the rack on
top.
GRILL
• Place the rack in position 3 or 4. Position the food in the
centre of the rack.
• We recommend that the temperature is set to its
maximum level. The top heating element is regulated by
a thermostat and may not always operate constantly.
PIZZA
• Use a lightweight aluminium pizza pan. Place it on the
rack provided.
For a crispy crust, do not use the dripping pan as this
extends the total cooking duration and prevents the crust
from forming.
• If the pizza has a lot of toppings, we recommend adding
the mozzarella cheese to the top of the pizza halfway
through the cooking process.