7 of 33
Indesit
Company
Service Manual UK
English
Display Information
Note:
During Sensor Cycles the Centre Timed display screen is blank
During Timed Cycles the left Sensor screen is blank
During Special cycles only the left Countdown screen is on and illuminated.
Sensing Levels
After selecting a programme that has a Sensing Dry Option, press and release the button until the
required dryness sensing level is displayed. If the sensing option is not available the display will flash
and the buzzer beeps three times.
Note: ‘Cottons - High Heat’ and ‘Jeans’ programmes are the only programmes which have all five
dryness level options - all other programmes have only 4 options.
Dryness levels available
Damp Dry
: Dries your items ready to be ironed using a machine or rotary ironer.
Iron Dry
: Dries you items ready to be ironed with a hand iron.
Hanger Dry
: Dries you clothes ready to be hanged for final drying; Use this program if
you do not need the items to be fully dry as it uses less Energy.
Cupboard Dry
: Dries your items ready to be put away.
Ready to Wear / Extra Dry
: Dries your clothes ready to be worn.
Timed Dry
After selecting a Programme that has a Timed Dry Option, press the Timed Button and the display will
Note: Timed Dry is only available on the following programmes:
Cottons - High Heat, Cottons - Low Heat, Shirts - High Heat, Shirts - Low Heat, Synthetics, Delicates.
reduce the selected time each time you press and release this button
(see Start and Programmes).
Each press decreases the set time
,
,
,
,
,
,
, then and then repeats.
If the Timer Dry option is not available the display will flash and the buzzer beeps three times.
The selected time remains displayed after the programme starts and cannot be changed after the after the
Start/Pause Button
is Pressed.
Delay Timer
After selecting a Programme that has a Delay Timer Option a delay start time can be selected.
Each press of
the Delay button
advances the delay setting in 1 hour Increments from
to
then
and then after five seconds cancels the delay.
For delays of 10 hours or more the display counts down the time in hours for first ten hours, then the display
shows
and then counts down in minutes. For delays less then 9 hours or less the display shows hours
and minutes and then count down in minutes for all of the delay.
After the Start/Pause Button
is pressed the time cannot be changed.
When the delay period finished the
symbol is off and the
Time to End
is displayed
Time to End
If the delay icon
is off the time displayed is the
Time to End
of the programme running.
When timed programmes are selected the time displayed throughout the cycle is the actual time
remaining.
When an Automatic programme is selected the time displayed is an estimate of the time remaining.
When the programme is selected the display shows the time required to dry a full load, after around 10
minutes the controller calculates a better estimate of the cycle time
The time to end is displayed in hours and minutes and counts down each minute.
The colons between the hours and minutes display flashes to show that the time is counting down.
The Display also shows if there is a problem with your dryer, if this occurs the display will show F
followed by a fault code number, the four option lights and the pause light will also flash Orange.
