Hotpoint Ariston 61359 Service Information Download Page 7

7 of 22

Indesit

 

Company

Service Manual UK

English

OPTIONS

Options are selected by pressing the button and confirmed by illumination an orange LED sited in the 
button.
If an option is not available with a programme, the LED will flash and a bleeping noise will be heard 
when pressing the button.

MINI LOAD 

This option is recommended if the Wash Load is equal to or less than half of the 

maximum recommended load. In addition to reducing the actual wash time, this option will reduce  
the water and energy consumption by 50%. It cannot be used with 

 & Pump Out options.

EASY IRON

 By selecting this option the wash and spin cycles will be modified in order to reduce 

creases. At the end of the cycle, the drum will turn periodically and the Start/Pause and Reduce 
Creases lights will flash Orange & End of Cycle will appear in the display. To complete the 
programme, press Start/Pause or 

Easy Iron

 button. If it is used with Silk/Curtains Cycle the 

machine suspends the wash load in water with Start /Pause and 

Easy Iron

 lights flashing Orange 

and Rinse Hold will appear in the display. To complete the programme (pump out water) press 
Start/Pause or 

Easy Iron

 buttons. It cannot be used with 

 & Pump Out options.

CHILD LOCK

 When activated programme and functions cannot be altered.

 (Control panel lock) 

EXTRA RINSE

  By selecting this option, the efficiency of the Rinse is increased and optimal 

detergent removal is guaranteed. Ideal for large wash loads and items for young children or 
people with sensitive skin. It cannot be used with 

 & Pump Out options.

DELAY START

 Press this button repeatedly until the desired delay period has been reached. 

This can be set from 1 to 24 hours.

SPIN REDUCTION

 Pressing this button can reduce or completely exclude the Spin Cycle. 

The Spin Speed set will be indicated in the display.

TEMPERATURE

 Pressing this button will decrease the programme temperature pre-set by the 

programme selection and will be indicated in the display.

PREWASH 

If this function is selected, the pre-wash cycle will run; this is useful for removing 

stubborn stains. N.B.: put the detergent in the relevant compartment. 
It cannot be used with 

 & Pump Out options.

Option Buttons

,   

,  ,  ,   

,   

 

,  ,  ,  ,  , 

Summary of Contents for 61359























Reviews: