10 of 22
Service Manual UK
Indesit
Company
English
CONTROLS INFORMATION
A single control board located at the back of the machine contains all the circuitry to control the
machine and interfaces with the LCD / Selector, option buttons and LEDs located on the console
panel. The control board has an access port to the rear of the machine.
Programmes are selected by using the Selector Dial. Special options can be selected by pressing the
appropriate buttons and the programme process followed by LEDs.
The machine is switched on using the On/Off button and selected programmes started by pressing the
Start/Cancel button.
MAIN BOARD PROGRAMMING
Programming a Main Board
There are a number of ways the board can be programmed - some of which are not applicable to
certain markets.
Types of programming:
1.
Handheld Terminal (Palm).
2.
Emit / Memwriter (UK Indesit Service Engineers).
3.
Smart Reader & Smart Card see photo.
Smart Card Reader
Smart Card
this card hold the program file
and can only be used ONCE.
