14 of 22
Service Manual UK
Indesit
Company
English
ERROR CODES & POSSIBLE CAUSES
When an error occurs the following will be indicated in the display.
Refer to the chart below for the error code definitions.
LCD
Display
Code
Possible Causes & Actions
F01
Motor triac short circuit:
Check motor and module
connections
F02
Motor jammed / tacho detached:
Check motor and module connections
F03
NTC short/open circuit:
Check thermistor and module connections
F04
Pressure switch jammed on empty:
Check switch and module
F05
Pressure switch jammed on full or pump blocked:
Check pump and switch
F06
N/A
F07
Heater relay stuck:
Check heater and module connections
F08
Heater relay stuck:
Check pressure switch, heater and module connections
F09
Setup error:
Check Eeprom
F10
Pressure switch not sensing:
Check switch and module connections
F11
Pump cannot be activated:
Check pump, connections and wiring
F12
No communication between cards:
Check module connections
F13
High temperature Rise In Drying: Reduced air flow through dryer heater
assembly.
Check operation of fan motor and dryer filter for blockage
F14
No Heat In Drying:
Check one shot thermostat. Check heater, valve and fan
motor module connections. Edge connector J10
F15
No Drying:
Possibly dryer relay open circuit
F16
N/A
F17
Door lock error:
Check door, door lock and module connections
F18
Communication error (3 phase motor):
Replace power board
