Non-Programmable Single Stage Thermostat
Reference No.:
HTW-ST01-A
- 5 -
Version 2019-1.0
Setting the temperature
Set the
SYSTEM
switch to either
HEAT
or
COOL
, then press the
▲
or
▼
button until the temperature you want to maintain is
shown on the right side of the display. If you want to turn the system off, just move the
SYSTEM
switch to the
OFF
position and the
FAN
switch to the
AUTO
position.
Clock setting
Move the
SYSTEM
switch to the
OFF
position, then press and hold the
▼
buttons for 5 seconds to enter the clock setting mode. The
display will show the HOUR setting first . Use the
▲
button to select each user setting. Press the
▼
button to shift to the next menu
item ( MINUTES,WEEK DAY).Use the
▲
button to select each user setting also.
Move the
SYSTEM
switch to the
HEAT
or
COOL
position to exit the setting menu. If no buttons are pressed within 15 seconds , the
thermostat will exit the configuration menu.
Filter review
Move the SYSTEM switch to the
HEAT
or
COOL
position, then press and hold the
▲
and
▼
buttons for 5 seconds to review filter
running days.To exit the review menu press the
▲
or
▼
buttons one time. Or If no buttons are pressed within 15 seconds, the
thermostat will exit the configuration menu.
In review mode, press and hold the ▲
and ▼
15 sec. to clean the filter warning. It will show “dEF” blink.
Child Lock
Quickly and simultaneously press the
▲
and
▼
three times to lock the temperature adjustment, and again to unlock.
RESET function.
This function can help operator to recovery system when fault happened, display out of order or system halted. Please use a pin
to insert in button RESET hole till sounded click, then loosen it.
Move the SYSTEM switch to the
OFF
position, then press and hold the
▲
and
▼
buttons for 5 seconds to enter the configuration
menu.
The display will show the first item in the configuration menu. Press the
▼
button to shift to the next menu item. Use the
▲
button to
select each user setting. To exit the configuration menu and return to normal operation, move the SYSTEM switch to the
HEAT
or
COOL
position. If no buttons are pressed within 2 minutes, the thermostat will exit the configuration menu. The configuration menu
chart summaries the configuration options. An explanation of each option follows.
Step
Press Buttons
Displayed (Defaults)
Select by ▲ or▼
Description
1
▲ & ▼ 5
seconds
CC (FA)
FA or SL
Select (FA)st or (SL)ow
cooling cycles, Default =
FA
-Note 1
2
▼
HC (FA)
FA or SL
Select F(ast) or (S)low Heating
cycles. Default = FA
-Note 1
3
▼
HO (0)
0 or 1
Select system heating type:
0 = Gas, oil, or electric heating.
1 = Heat pump heating.
Default = 0
Thermostat Operation
Configuration Menu
The configuration menu allows you to set certain thermostat operating characteristics to your system or personal
requirements. It is also called as ISU(Installation Set-Up) process.
