START to confirm and pass on to the line below.
Position on YES with the “+” and “-” buttons and confirm by pressing the START button.
The display will show the indication SURE DELETE, then get positioned on YES with the “+”
and “-” buttons and give confirmation by pressing the START button. Then the subsequent
screen OPERATION COMPLETED will appear.
Conversely, by selecting NO the program will be exited.
B.
To store a recipe through the PC,
writing even ingredients and quantities, or to
modify or delete a recipe from the SD card through the PC, please proceed to the
www.hotmix.it
website, at the “RECIPE MANAGEMENT INSTRUCTIONS” where the
minimum system requirements can be found, together with the necessary instructions
to execute this simple operation.
SPECIAL FUNCTIONS
“WAIT TEMPERATURE” FUNCTION
This function,
particularly useful for pastry preparations,
allows the machine to reach a
temperature that has been pre-determined by the user. Once reached this temperature, the
recipe has been completed (e.g. Custard), but the WAIT TEMPERATURE function enables to
keep mixing the just completed preparation, requiring that a TIME digit below 04:00 hours is
being set into the machine.
When one wants to use the preparation, the machine must be stopped MANUALLY, by
pressing the START/STOP button.
PERSONAL TOUCH:
To facilitate the perfect success of the stored recipes, you can repeat the last sequence of
processing as follows:
• Press the "clock"
• You will hear a beep
• Set a time of your choice
• Press the "Start"
In this way the unit will repeat the last sequence with the same speed and the same
temperature, for the time you set. It is very useful, for example, to give a final touch to food
preparations that are not to your liking, without the need to reset all the digits again.
DELAYED DEPARTURE
There are 3 ways to operate the machine with the late departure.
MANUAL PROGRAMMING
When the machine is turned on, to set the current time, press and hold the button "clock" for
5 seconds till you will hear 3 beeps.
Now the display shows "- -: - -" with the first two lines that are flashing, they indicate the
hour, with the "+" and "-" buttons you could just set the time format 0-24.
Once you have chosen the time, you have to store your data by pressing the "start / stop"
button: after flashing, the second two lines are to indicate the minutes: with the same
procedure you store the minutes.
Then, you must set the time you want the appliance get started, and with the same system
you set the hour .
Once you confirm the information with the START / STOP button, the display will show the
clock icon, which means that we must set (again with the "+" and "-" buttons) the time we
