slipping by.
In case of severe fault, the spanner will switch on while anything else will switch off. The
appliance must then be brought to a service center.
MOTOR CONTROL THERMOSTATS
Your appliance is equipped with two thermostats for motor protection: one dynamic and one
static. The dynamic thermostat always intervenes before the static, which stops the machine
pointing Er: 01.
The dynamic thermostat, in fact, make an "intelligent" control of the motor temperature,
stopping for a moment, if necessary, to cool the motor down and finish the recipe, before
involving the static thermostat. When the dynamic thermostat is in operation, the word
"PULSE" will be displayed, and you can easily finish the preparation. If, however, an excessive
amount of ingredients or a too thick preparation takes place (which can cause a strain upon
the appliance, with consequent overheating of the motor), the static thermostat comes into
operation, stopping the motor immediately. The display shows "Er: 01".
Wait a few minutes before the appliance cools down, and when the motor has reached an
acceptable temperature, the machine is automatically ready for use again. To do this you have
a forced air cooling fan that also works when the machine is off.
SD card (9)
The machine is equipped with an SD card which is placed inside a compartment on the back of
the unit. In order to access it, it is necessary to unscrew the door which protects the
compartment.
There are three files inside the SD card:
File D
(Default): it contains programs, recipes and specially stored functions;
File
U
(User): it is suited to store personal recipes;
HotMix file,
with the program to install on the PC to store, modify and cancel recipes through
the PC.
ACCESSORIES
COVER (2)
• Mount the cover by pressing the two side flaps (4) and exerting a little pressure. It will be
very easy.
The lid has a gasket (5), which must always be mounted correctly to avoid the risk of leaking
fluids.
WARNING: The incorrect position of the gasket (5) could enable the spill of liquids, or
prevent the start of the appliance.
• If the lid is not closed properly, the electromagnetic safety device (3) prevents the appliance
to start working, and the display shows the icon of the bowl with an opening lid.
• To open the lid, press with two fingers on the side flaps (4) and lift them up.
WARNING: If there are some liquids in the bowl and the speed is high, wait before
opening the lid a few seconds so the liquid will come back to their ordinary level, to avoid over
spilling.
CAUTION: Before you start the appliance, please always check that the two side flaps
are closed.
