Delete of a pre-stored recipe
STORAGE OF A RECIPE
There are two ways to store one's own recipe:
A.
Directly from the machine,
into the U file, it is possible to store number and name of
a recipe, number of the steps required to complete it, and the operating parameters
(speed, time and temperature). It is not possible to write the ingredients and the
quantities, if you wish to include these infos please proceed to point B.
B.
From the PC
, after inserting the SD card into the appropriate card reader, through the
program into the Hotmix file it is possible to store number and name of the recipe,
number of the steps required to complete it, and the operating parameters (SPEED,
TIME and TEMPERATURE), besides writing ingredients and related quantities.
A.
To store a recipe directly from the machine
:
Keep the MENU button pressed for at least 3 seconds.
Use the “
+”
e “
-”
buttons to let the Menu words flowing till selecting “STORE”, and
press the “START” button.
It is necessary to select the number of the recipe to be stored, by letting the numbers
flowing with the “+” and “-” buttons. Confirm the selected number with the START
button: in case the selected number is already assigned, the indication “ATTENTION
RECIPE EXISTING” will appear, and it will fade away after 3 seconds; a “beep” will be
then heard, and the display will go back to the previous screen, in order to enable the
selection of another number. In case the selected number will be available, please
confirm with the START switch, then go ahead to the subsequent line.
The storage of a recipe should be made by dividing it into steps, starting from 1
upwards, using the “+” and “-” buttons. Then confirm with the START button, and then
go ahead to the subsequent screen of setting modes.
If when storing each step an already assigned number will be chosen, a “beep” will be
heard after 3 seconds and the display will go back automatically to the previous
screen, to enable the insertion of the correct number.
Once on the screen of the setting modes, select the SPEED digit with the “+” and “-”
buttons, and the PULSE switch as well if required, then press START to confirm.
Now we go to the TIME setting mode. Please select the digits with the “+” and “-”
buttons, confirm with the START button, and then go to the next setting mode.
So we get to the TEMPERATURE setting: please select the digit with the “+” and “-”
buttons, confirm with the START button, and the go to the next setting mode, that is
the selection of the accessory to be used.
Selection of the ACCESSORY: please go the requested accessory by the “+” and “–“
buttons, then confirm with the START/STOP button.
All the set data are to be confirmed (or not) with the subsequent screen by using the
“+” and “-” buttons, to get positioned over YES, or NO and then pressing the
START/STOP button. If the data are confirmed, then the subsequent screen will
appear, otherwise it will go back to the initial screen. In both cases the name of the
