You are now finished with the front sway bar installation! Make sure that all hardware is fully tightened before
driving the vehicle. Let’s move on to the rear sway bar installation.
INSTALLATION OF HOTCHKIS REAR SWAY BAR
1)
Secure the front wheels with blocks and jack the rear up until the rear wheels are off the ground.
Support the rear of the vehicle with jack stands on the factory jack points.
2)
Remove the rear wheels using a 21mm socket.
3)
Begin removing the rear shocks by removing the lower nut and bolt using a 18mm wrench and 15mm
socket respectively. Remove the 2 upper shock bolts using a 16mm socket.