Hot Shot HS-360 Owner’s Manual R2.0 | 4
Your heating element is made from Kanthal Ni-Chrome wire, allowing cold air to enter a hot oven will harden
your element and make it become brittle. Never use compressed air or fans to force cool the oven, always close
the door and let the oven cool on its own, this will keep your heating element annealed.
Our cool touch technology, with the fan running, should keep the outer surface within 20°C of room ambient
temperature.
OVEN ON TEMP NOW?
Here’s a few things to do after your oven has reached a stable operating temperature
1. Press and hold the “P” button until “ATUNE” appears, select yes and let your unit set its own PID’s. Auto
tune is complete when the “tune” light goes out on the main screen. Always auto tune +/- 200°F of your
normal operating temperatures. Keep the door closed during this tuning; oven needs to be stable and have
no cold air introduced during auto-tune.
2. Make certain that the cooling fan located in the back of your oven has engaged and the fans air movement
is not impeded.
SAFETY RECOMMENDATIONS
1. Do not use an extension cord.
2. Install on a 20 amp 120V circuit.
3. Do not use the oven to cure paint or any other solvent borne products.
4. Do not use the oven for powder coat.
5. Use in a well ventilated area.
6. Wear protective clothing and protect thyself from burns.
7. Turn off the “heat enable” when loading/unloading parts.
8. Do not unplug the unit till it has fully cooled down.
9. Do not EVER put magnesium in the oven.
10. Do not exceed 2000°F.
11. Do not block any vents
12. Keep the fan exhaust at least 3 inches from any wall or obstruction.
13. In the event the oven overheats, the oven will automatically shut down. Please contact our office at
262-361-4912 to work with our team on resetting your oven if shut down occurs.
