-
5
-
e) Electrical Connection
Connect the supply cord to the socket at the rear of the Ice Maker. Insert the 3-pin plug into
a 13A socket. Ensure that the supply is 220-240V 50Hz. Switch off the supply and remove
the plug when cleaning the appliance or the appliance is not in use. (See picture below)
WARNING:
This appliance must be earthed.
f) Drip Tray
Position the Drip Tray provided under the front edge of the appliance. This will then collect
any drops of water that may run down the front of the appliance when the Ice Container is
pulled out.
g) Removing the Ice Cubes
Slide the Ice Container forwards and use the Ice Scoop provided to remove the ice cubes.
Push the Ice Container back fully into position when the ice cubes have been removed. (See
picture below)
