-
4
-
Ice Full Indicator
(red): When the Ice Container is full of ice cubes, the indicator will
turn red. The ice making cycle will stop after the next batch of ice cubes have been released
into the container. The unit will then go into standby mode. Remove the ice cubes before
pressing the 'STOP' and then 'START' buttons to restart the ice making cycle.
Low Water Indicator
(red): The Ice Maker will automatically check the water level in
the Water Tank. If the water level is too low, the red light will come on and the ice making
cycle will stop. When water is added to the Water Tank, the ‘Low Water Indicator’ will go off
and the unit will automatically restart.
c) Moving the Unit
When unpacking or moving the Ice Maker, please note that the unit should not be tilted over
45°. Keep the appliance upright at all times. There are ‘handles’ at the rear edges of the
casing which should be used when moving the Ice Maker. (See picture C)
A
B
C
d) Locating the Unit
Position the Ice Maker on a sturdy flat surface so that there is a clearance of 150mm all
around. (See picture below)
≥
150mm
≥
150mm
