-
3
-
2. Operation
a) Ice Making Cycle
The ice making cycle has 5 steps:
1. Pumping water from the water tank up to the water tray.
2. Operating the refrigeration system to create the ice cubes.
3. Emptying the excess water from the water tray.
4. Releasing the ice cubes into the ice container.
5. Returning the water tray to its upright position.
This cycle continues until the ice container is full of ice cubes or there is insufficient water in
the water tank.
b) Control Panel
‘START’
and
‘STOP’
buttons:
When the power is connected, the unit will go into standby mode. (One of the ice size
indicators will be flashing). When the
‘START’
button is pressed the selected ice size
indicator will remain on and the ice making cycle begins. When the
‘STOP’
button is pressed
the ice making cycle will stop. The water tray will empty the water back into the water tank
and any ice cubes will be released into the ice container, before the unit goes back into
standby mode.
‘ICE SIZE’
button:
Press this button to select the required size of ice cubes. (The default size is small) The ice
size indicator will cycle between small-medium-large and back to small, each time the button
is pressed.
Note: If the Ice Maker is operated in a cool ambient, it is recommended that ‘Small’ ice
cubes are selected.
Large Size Indicator
(green): When this light is on, it indicates that the unit is making
large ice cubes and the cycle time will be the longest.
Medium Size Indicator
(green): When this light is on, it indicates that the unit is
making medium size ice cubes.
Small Size Indicator
(green): When this light is on, it indicates that the unit is making
small ice cubes and the cycle time will be the shortest.
