7
765042226 Rev.000
POSITIONING
The appliance must be installed and tested in full compliance with accident-prevention regulations contained
in national law and current guidelines. Installers are to comply with any current local regulations
.
Place the appliance onto the required working site.
Avoid locations with exposure to direct sunlight.
Do not place the appliance in hot, poorly-ventilated rooms.
Do not place the refrigerated compartment near heat sources.
Leave a min. 100-mm clearance around the
appliance on the sides where air inlet and outlet are
located.
Level the appliance by means of adjustable feet.
WARNING
:
If the appliance is not properly levelled the performance and condensate drain may be
hampered
.