Mini Lady Hi-Carb Chiller
240V / 50Hz
lancerbeverage.com
Page 10 of 11
Hoshizaki Lancer reserve the right to change specifications without notice
No 005 – 26 October 2010
Washing and sterilization
Using the special liquid detergent diluted in cold water, proceed to clean the coil lines where the
liquid passes, in the following way:
A. Disconnect the premix beverage and discharge all the beverage in the circuit.
B. Prepare the liquid detergent by diluting it in water, carefully paying attention to the
recommended doses.
C. Fill the circuit with the prepared liquid, leave for approx 15-20 .
D. Thoroughly rinse all the circuit lines with water.
E. Reset the machine to its original condition by reconnecting the premix beverage.
11.2 Overflow
Periodically check that the hole and the overflow pipe are not blocked with dirt or ice. Restore the correct
down flow of water.
11.3 Checking efficiency
Make sure that the motor fan is free from any filaments and dust. Make sure that the motor stirrer has no
scaling due to the water limestone. Remove any scaling.
12. Maintenance
12.1 Cleaning the tank
Clean the water tank every 12 months.
Procedure:
A. Disconnect the machine’s electrical plug from the mains outlet.
B. Thaw the bank of ice formed in the tank. Do not transport the machine with the formed ice
bank to avoid breaking the capillaries.
C. Never use sharp or cutting objects to remove ice from the evaporator; use only warm water
so as not to damage the evaporator and the tank; empty the water tray with a suction pump
or draining pipe.
D. Clean the stainless steel coils and the evaporator using a soft brush, rinse the tray and coils
with clean water.
E. Fill the tank with sufficient clean water to cover the evaporator.
F. Check that the overflow pipe and the piping are free from any obstructions.
12.2 Resetting the machine
After placing the machine covers, insert the machine’s electrical plug in the mains outlet
