Mini Lady Hi-Carb Chiller
240V / 50Hz
lancerbeverage.com
Page 8 of 11
Hoshizaki Lancer reserve the right to change specifications without notice
No 005 – 26 October 2010
8.7 Storage of the machine without packaging
Do not store the machine without its special packaging. Should, however, this not be possible the
machine must be stored in a humidity-free room and not be exposed to bad weather. Do not stack
other machines on top of the machine without its special packaging.
9. Machine Not in Use
To deactivate the machine, proceed as follows:
A.
Disconnect the electrical plug from the socket outlet.
B.
Remove all the water contained in the cooling tray using the appropriate draining pipe or a
suitable transfer pump.
C.
Clean the interior and exterior of the machine’s stainless steel coils and taps using a suitable
liquid detergent.
D.
Repack the machine in its original packaging.
10. Installation and Adjustment
Warning
To avoid personal injury or damage, do not attempt to lift a
Chiller without help.
10.1 Installation
After having removed the machine from its packaging as described in point 8.5 make sure that:
A. The supporting surface on which the machine will be installed is solid and perfectly level.
B. Position the machine away from sources of heat and humidity.
C. The condenser must always be free and in good working order, leave a gap of at least 20-30cm
from the wall to allow good air circulation in the condenser.
10.2 Filling the tank
After the machine has been installed as per point 10.1, proceed to fill the tank. Remove the upper
cover of the machine, pour clean water in the tank, and avoid adding brine and/or various other
additives until the evaporator is covered. Connect the outlets of the overflow pipe, with the plastic
pipe, to the nearest drain. Replace the cover.
