background image

3

   • Please review this manual.  It should be read carefully before the icemaker is installed

and operated. Only qualified service technicians should install, service and maintain the
icemaker.  This manual should be made available to the technician prior to installation,
maintenance or service.

   • Keep this manual with the icemaker for future reference.

CONTENTS

PAGE

I. SPECIFICATIONS .................................................................................................... 4

1. NAMEPLATE RATING ............................................................................................ 4

[a] KML-450MAH (Air-cooled) ................................................................................. 4
[b] KML-450MWH (Water-cooled) ........................................................................... 5

2. DIMENSIONS/CONNECTIONS .............................................................................. 6

[a] KML-450MAH ..................................................................................................... 6
[b] KML-450MWH .................................................................................................... 7

II. INSTALLATION AND OPERATING INSTRUCTIONS ............................................. 8

1. CHECKS BEFORE INSTALLATION ....................................................................... 8
2. HOW TO REMOVE PANELS .................................................................................. 9
3. LOCATION .............................................................................................................. 9
4. SET UP ................................................................................................................. 10
5. ELECTRICAL CONNECTION ............................................................................... 10
6. WATER SUPPLY AND DRAIN CONNECTIONS ................................................... 11
7. FINAL CHECK LIST .............................................................................................. 13
8. START UP............................................................................................................. 14
9. PREPARING THE ICEMAKER FOR LONG STORAGE ....................................... 16

III. CLEANING AND MAINTENANCE INSTRUCTIONS ............................................. 18

1. CLEANING INSTRUCTIONS ................................................................................ 18

[a] CLEANING PROCEDURE ............................................................................... 18
[b] SANITIZING PROCEDURE ............................................................................. 20

2. MAINTENANCE .................................................................................................... 21

Summary of Contents for KML-450MAH























Reviews: