44
12. REMOVAL AND REPLACEMENT OF WATER VALVE
1) Turn off the power supply.
2) Close the Water Supply Line Shut-off Valve.
3) Remove the Top Panel and Front Panel.
4) Remove the Valve Outlet Tubing by releasing the Clamp.
5) Remove the Bracket from the unit.
6) Remove the Fitting Nut and Water Valve.
7) Disconnect the Terminals from the Water Valve.
8) Install the new Water Valve, and replace the removed parts in the reverse order of
which they were removed.
9) Open the Water Supply Line Shut-off Valve.
10) Turn on the power supply.
11) Check for leaks.
12) Replace the Top and Front Panels in their correct positions.
13. REMOVAL AND REPLACEMENT OF PUMP MOTOR
1) Turn off the power supply.
2) Remove the Front Panel.
3) Remove the Base Cover.
4) Drain the Water Tank by removing one end of
the Pump Tubing. (See Fig. 3.)
5) Replace the removed parts in their correct positions.
6) Disconnect the Pump Suction and Discharge Hoses.
7) Remove the screws and the Pump Motor Bracket.
Fig. 3
