42
III. Maintenance
The appliance must be maintained in accordance with the instruction manual and labels
provided. Consult with your local Hoshizaki Certified Service Representative about
maintenance service.
WARNING
• Only qualified service technicians should service the appliance.
• To reduce the risk of electric shock, do not touch the icemaker power switch or
control switch with damp hands.
•
Before Servicing:
Move the icemaker's power switch to the "OFF" position. Turn off
the power supply. Place the disconnect (if applicable) in the off position.
Lockout/Tagout to prevent the power supply from being turned back on
inadvertently.
•
CHOKING HAZARD:
Ensure all components, fasteners, and thumbscrews are
securely in place after any maintenance is done to the appliance. Make sure that
none have fallen into the dispenser unit/ice storage bin.
Fig. 18
Spout
Chute
Packing and Nylon Ring
Chute Insulation
Extruding
Head
Evaporator
Assembly
Reservoir
Float Switch
Rubber O-Ring
(FD-650 and Larger)
Nylon Ring
(FD-650 and Larger)
Evaporator
Condensate
Drain Pan
Infrared Sensor Lens
Evaporator Packing
(F-450 Only)
Spout-to-Chute Packing
Spout-to-Chute Bracket
Spout-to-Chute Strap
Reservoir Hose
Overflow Hose
Reservoir
Cover
Model Shown: F-1002MAJ-C
Cutter
Spout
Thumbscrews
Wing Nuts
Baffles
Bin Control Assembly Mount
Actuator
Proximity Switch (mechanical bin control)
Plate
Spout-to-Chute Strap
Shaft
